cnc machine, as one of the most widely used CNC machine tools, has the same workflow as the general CNC machine tools. We put the parts of the processing process route, process parameters, tool trajectory, displacement, cutting parameters and auxiliary functions, in accordance with the instructions of the CNC machine tool code and program format written into the processing program, and then the content of the program in the single record in the control medium, and then input into the CNC machine tool CNC device, so as to command the machine tool processing parts. We pay more attention to the stability and reliability of cnc machine in use. To this end, the following issues should be noted when using CNC machine tools.

1, the use of the environment: should avoid direct sunlight and other thermal radiation, to avoid too wet or dusty places, especially to avoid corrosive gas places. Corrosive gases are prone to corrosion and deterioration of electronic components, or cause poor contact. Or cause components to run short circuit, affect the normal operation of the machine. To stay away from large vibration equipment, such as punches, forging equipment, etc.

2, power requirements: the machine tool adopts special line power supply or adds a voltage regulator, which can reduce the influence of power supply quality on the machine tool and electrical interference.

3, operating procedures: Operating procedures are one of the important measures to ensure the safe operation of CNC machine tools, the operator must operate according to the operating procedures. When the machine fails, the operator should pay attention to keep the site, and truthfully explain the situation before and after the failure to the maintenance personnel. In order to facilitate the analysis and diagnosis of the cause of the fault, timely troubleshooting, reduce downtime.

4, machine tools should not be stored for a long time: after the purchase of CNC machine tools to make full use of, as far as possible to improve the utilization of machine tools, especially in the first year of use. It is also necessary to make full use of it so that its weak links prone to failure are exposed as soon as possible. The hidden danger of failure can be eliminated as far as possible during the warranty period. If there is no production task in the factory, when the CNC machine tool is not used for a long time, it should also be regularly powered on, as far as possible, it can be powered on one or two times a week, each time running empty for about 1h, in order to use the heat of the machine tool itself to reduce the humidity in the machine, so that the electronic components will not be damp, and at the same time, it can also find out whether the battery alarm occurs. To prevent the loss of system software and parameters.

cnc machine https://www.zjshuangzheng.com/